SKC 575-005 Series Passive Sampler - Manual (Page 3)

3
Storage
Before use: Store at < 39.2 F (4 C).
Aft er use:
Store at < 39.2 F (4 C) for up to 3 weeks.
SKC recommends expedited shipment of samples.
Do not store with food.
Analysis
Solvent desorption, Gas Chromatography/Electron Capture Detector (GC/ECD)
See Analysis Instructions at www.skcinc.com/instructions/37009.pdf.
Validation
The SKC Ethylene Oxide Passive Sampler has Full validation. Full validation
means that it has passed all NIOSH Partial validation protocol and factorial
study, including interfering compounds. This is the most rigorous test and in-
cludes all parameters aff ecting sampling accuracy.
For compliance sampling, it is recommended that only those passive samplers
with agency, Full, or Bi-level validation be used. Passive samplers with lower
validation levels should be used only if verifi ed by sorbent tube methods.
References
Yost, C., Validation of Ethylene Oxide Using the SKC 575-005 Diff usive Sampler, SKC
Publication 1543, June 2000, available at www.skcinc.com
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the com-
plete SKC Limited Warranty and Return Policy, go to htt p://www.skcinc.com/
warranty.asp.