SecurityMan DigioutLCD User Manual

Page 33

• • Adding Cameras

To add a camera to your system simply highlight any of the

available cameras/channels (unlocked) and press the

OK button

on the LCDDVR. Once selected, a confirmation screen will pop up

asking you to confirm (

YES) or cancel (NO) your selection, use

the

LEFT and RIGHT buttons to make your selection and press

the

OK button to confirm. During the registration process a pop

up window showing “

Add/Remove Camera” will be displayed for

approximately 10 seconds.

NOTE: When adding a camera, press the OK button on the

LCDDVR to confirm the adding camera selection and then

immediately press the “

Pairing” button located on the back of the

camera 3 consecutive times (press, release, press, release, and

press and release). There is a 10 second grace period for adding

cameras, if pairing is unsuccessful before the 10 second grace

period has expired, then a pop up displaying “

operation failed”

will appear. Pairing must be done within 20 ft from the LCDDVR.