SecurityMan DigioutLCD - Manual (Page 32)

28
• Auto Scan
Auto Scan is used to set up an automatic camera rotation period
between cameras 1-4. Simply highlight and press OK on Auto Scan.
Use the Up and Down buttons to make your selection and press the
OK button to save your changes. Options include: Never (default), 5
seconds, 10 seconds, 15 seconds, and 20 seconds.
NOTE: You can manually toggle between cameras 1-4 by pressing
the Camera button on the LCDDVR. During “single channel live
view”, the LCDDVR will not toggle if the user is utilizing the manual
recording feature and will only record the current camera being
displayed during motion detection recording.
• Add/Remove Camera
The Add/Remove Camera option is used to add/remove cameras
to or from LCDDVR. Camera 1-4 shown in the image below
represent all the channels available on your system (a LOCK symbol
represents a camera that is already registered to that channel and
an UNLOCK symbol represents an available channel that is free). To
access these options simply highlight and push the OK button on
the Add/Remove Camera option.
NOTE: By default the camera(s) that come with your DigiLCDDVR
kit will be added in sequence from Camera 1-4.