SecurityMan DigioutLCD - Manual (Page 14)

SD
10
Quick Start
1. Fasten the antennas to the cameras, and mount the cameras in the
desired location. Then connect the power adapters to the cameras.
The power adapters for the cameras are 12VDC/ 1.0A
2. Plug in the LCDDVR power adapter (12VDC, 1.0A) from a power outlet
to DC IN of LCDDVR monitor/receiver. Then insert an SD card (face
up) into the SD card slot as illustrated below. The SD slot is located on
the left hand side of the LCDDVR. Next, turn LCDDVR on by moving
the power switch to the ON position; the power switch is located on
the right side of the LCDDVR.
NOTE: Make sure to format the SD card prior to starting the recording
process. To format please follow the formatting sections of this manual.
CAUTION: To prevent electric shock or
damages to the cameras, please make
sure to properly insolate the camera’s
power connections if being used as an
outdoor application.
NOTE: Before mounting the cameras,
please do a quick reception quality
test before mounting the cameras.
Digital Wireless Outdoor Camera