beautypg.com

SecurityMan DigioutLCD User Manual

Page 20

background image

16

• In

Single Channel Full Screen Display you can use the Camera button

on the LCDDVR to toggle through all four cameras in single channel full

screen display and then press the

Record button to start recording when

the desired camera is being displayed on the screen.

NOTE: Recording in single camera independently will lock the LCDDVR

to that channel preventing it from being able to toggle to any other

available cameras.

Camera button

The

Camera button is used to toggle back and forth between each

camera in full screen display. In Quad mode, press the

Camera button

to start and stop recording by highlighting the camera and pressing the

Record button.
Quad Screen button

Pressing the

Quad Screen button will toggle between single channel full

screen display and a split screen of all the cameras on your system.
Menu button

Press the

Menu button to access the LCDDVR setup menu. The Menu

consists of system Settings, Playback/SD Card, Camera, and Exit. See

detail

Menu Setup operation below.

Exit button

Press the

Exit button at any time to exit out of the menu. The Exit button

plays no role in live display screen.
UP, DOWN, LEFT, RIGHT buttons

Use the

Up (increase) and Down (decrease) buttons on the LDCCVR at

any time during live view to adjust the volume level. The

LEFT and RIGHT

buttons plays no role in live display screen.