SecurityMan DigiLCDDVR Series - Manual (Page 31)

27
Camera
Camera options consist of 3 settings: Auto Scan, Add/Remove Camera
(used to add or remove digital wireless camera from DigiLCDDVR), and
Refresh Rate. To access these options simply highlight and press the OK
button on the
Camera option as illustrated below.
• Auto Scan
Auto Scan is used to set up an automatic camera rotation period
between cameras 1-4. Simply highlight and press
OK on Auto Scan.
Use the Up and Down buttons to make your selection and press the
OK button to save your changes. Options include: Never (default), 5
seconds, 10 seconds, 15 seconds, and 20 seconds.
NOTE: You can manually toggle between cameras 1-4 by pressing the
Camera button on the LCDDVR. During “single channel live view”, the
LCDDVR will not toggle if the user is utilizing the manual recording
feature and will only record the current camera being displayed during
motion detection recording.