SecurityMan DigiLCDDVR Series - Manual (Page 20)

16
Menu Setup
Press the Menu button on the DVR/Receiver at any time to enter the
Main Menu Setup window as shown below. Then use the UP, DOWN,
LEFT, and RIGHT buttons to toggle through the menu options, press
the
OK button to select, save the changes, and press the EXIT button to
exit from the selected menu screen.
NOTE: The system will automatically exit from the menu options if
inactive for 20 seconds. When the system is in recording mode, pressing
on the Menu button will temporary stops the system from recording until
exiting out from the Menu, then the recorder will resume the recording.
Settings
From the menu screen select system
Settings as illustrated below. The
system Settings consists of Brightness, Motion Detection, Date and
Time, TV Standard, Language, and System Information.