Schlage BE365 Installation - Manual (Page 2)

Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole has no mortise, change to the circular faceplate.
OR
C
Door Edge Door Edge
No change necessary.
Install Lock
Rotate baseplate cam to correct position.
1
Cam MUST
be vertical!
Cam
OR
Install bolt.
2
Wood Block
(Not Included)
Actual Size
Bolt must remain retracted
throughout installation!
Retracted Extended
Install keypad.
3
Slide tailpiece through slot.
Route wire over bolt.
Route wire through hole in baseplate.
4