Robinair 34134Z Refrigerant Recovery, Recycle, Recharge Unit - Manual (Page 30)

© 2003 SPX Corporation
28
Filter-Drier
INST1001
WARNING
High voltage electricity inside the unit has a risk of electrical shock. Disconnect the
power before opening the back door or servicing the unit.
Replacing the Filter-drier contd.
Maintenance
9. Open the back door of the unit’s protective covering. To unlock the door,
turn the two screws 1/4 turn counterclockwise.
Filter-drier Location
(Back View of Unit)
10. Remove the strap, disconnect the fittings from the filter-drier, and remove
the filter-drier.
NOTE: Dispose of the filter-drier according to current federal, state, and
local regulations.
11. Install the new filter-drier with the FLOW direction arrow pointing down,
tighten the fittings, and secure with the strap.
12. Close and lock the back door of the unit’s plastic covering. To lock the
door, turn the two screws 1/4 turn clockwise.
After replacing the filter-drier, reset the filter-drier capacity. Refer to the
instructions on the next page.
#
FLOW