Robinair AC900 Station - Manual

Operating Overview
For Model AC900 and AC890 Stations
For all procedures shown, manifold and tank valves must be open.
This does not replace the instruction manual. Before operating the unit, read and understand the manual.
Observe all warnings.
Recover - Automatic
Connect station hoses to A/C system.
Turn Main Power switch ON.
Press RECOVER on keypad.
Evacuate and Recycle - Automatic
Recharge
Press CHARGE to display CHARGE and LBS.
Press MODE and the arrow keys to enter amount
of refrigerant to be charged.
Press ENTER on keypad.
Press CHARGE on keypad.
Press MODE and ENTER at the same time.
Press UP arrow until display reads FOI.
Press ENTER.
Press SHIFT/RESET to end.
Evacuate - Manual
Recycle - Manual
Press MODE on keypad.
Using the arrow keys, enter required
evacuation time.
Press ENTER on keypad.
Press VAC/RECYCLE on keypad.
Press RECYCLE ONLY.
DOWN
VAC.
RECYCLE
CHARGE ENTER
ADD
FILTER
MODE
RECYCLE
ONLY
RECOVER
HOLD
UP
CONT.