Rivers Edge RE703 Outpost - Manual (Page 4)

TREESTANDS
10' Outpost ™ Tower w/ Blind Kit (RE703)
Page 4
HuntRiversEdge.com
HuntRiversEdge.com
800-450-EDGE (3343)
8. a. Insert (2) blind rim rails (TWr19) into (2) rail spanner tubes (TWr26)
forming a square. Align the four holes and insert (4) provided 1/4-20 x
1-1/4” bolts, locknuts and washers.
SEE fIGURE 5.
b. Assemble this square to the inside the four blind uprights by attaching
(2) rail spanner tubes to the two blind uprights that are attached to the
outside platform joiner using (2) provided 1/4-20 x 2-1/4” bolts, locknuts
and washers.
SEE fIGURE 6.
c. Attach the two blind rim rails to the two blind uprights that are attached
to the long side of both platforms using (2) provided 1/4-20 x 2-1/4” bolts,
locknuts and washers.
SEE fIGURE 6.
fIGURE 6
fIGURE 5
blind rim rails
1/4-20 x 1-1/4" bolts
washers
rail spanner tubes
locknuts
1/4-20 x 2-1/4" bolts
washers
blind uprights
locknuts
assembled blind rim rail