Rivers Edge RE703 Outpost - Manual (Page 3)

TREESTANDS
Page 3
HuntRiversEdge.com
10' Outpost ™ Tower w/ Blind Kit (RE703)
HuntRiversEdge.com
800-450-EDGE (3343)
4. Attach (4) leg receivers (TWr25) to the bottom four corners of platform
using (8) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE
fIGURE .
NOTE: Bolt heads should be inserted as shown in figures. This will help
prevent unnecessary wear or interference to the fabric blind.
5. Attach (2) blind uprights (TWr18) to the long sides of both platforms using
(2) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE fIGURE
3.
6. Attach remaining (2) blind uprights (TWr18) to the outside platform joiners
using (2) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE
fIGURE 4.
7. Attach (4) upright support flat bars (SL8) to the blind uprights and platform
using (8) provided 1/4-20 x 1-1/2” bolt, locknuts and (4) washers. SEE
fIGURE 3 & 4.
fIGURE 4
fIGURE 3
blind uprights
locknuts
washers
1/4-20 x 1-1/2" bolts
support flat bars
1/4-20 x 2-1/2" bolts
1/4-20 x 1-1/2" bolts blind uprights
1/4-20 x 1-1/2" bolts
washers
locknuts
1/4-20 x 2-1/2" bolts
support flat bars
1/4-20 x 1-1/2" bolts
fIGURE
leg receivers
1/4-20 x 2-1/2" bolts
locknuts