RECON 26414-26414X BIG RIG & BIG RIG ICE Running Lights User Manual
Page 3
26413 - 26413X - 26414 - 26414X - Installation Instructions RECON BIG RIG & BIG RIG ICE LED Running Light Kitss
Figure 4
5. Now you are ready to test the bar by turning on your headlights and activating your hazard lights to
confirmthat the bar illuminates properly and gets brighter as the hazard lights blink. Once you have
confirmed that everything is working as it should, complete the assembly of the drivers side and begin
the installation of the remaining L.E.D. bar on the passenger side of the truck by repeating everything
you have done to the drivers side.
If you have any questions, feel free to contact us:
RECON Truck Accessories
info@GoRECONcom - www.GoRecon.com
TURN SIGNAL WIRE
(RED Wire)
RUNNING LIGHT WIRE
(ATTN: this wire is now YELLOW)
The WHITE wire is only found on the
BIG RIG ICE KIT. & is the power wire
for the white LED courtesy lights.