Ransburg RF1 FiberOptic Meter 77786-XX, A11516-XX - Manual (Page 6)

FM-00-02.5 2 2 2 2 2
RF 1 Fiber Optic - Safety
Spray Area Spray Area Spray Area Spray Area Spray Area Fire Hazard
Improper or inadequate opera-
tioning and maintenance proce-
dures will cause a fire hazard.
Protection against inadvertent
arcing that is capable of causing
fire or explosion is lost if any
safety interlocks are disabled
during operation. Frequent pow-
er supply shutdown indicates a
problem in the system requiring
correction.
Fire extinguishing equipment must be present in the
spray area and tested periodically.
Spray areas must be kept clean to prevent the
accumulation of combustible residues.
Smoking must never be allowed in the spray area.
The high voltage supplied to the atomizer must be
turned off prior to cleaning, flushing or maintenance.
When using solvents for cleaning:
Those used for equipment flushing should have
flash points equal to or higher than those of the
coating material.
Those used for general cleaning must have flash
points above 100
o F (37.8 o C).
Spray booth ventilation must be kept at the rates
required by NFPA-33, OSHA, and local codes. In
addition, ventilation must be maintained during clean-
ing operations using flammable or combustible sol-
vents.
Electrostatic arcing must be prevented.
Test only in areas free of combustible material.
Testing may require high voltage to be on, but only
as instructed.
Non-factory replacement parts or unauthorized equip-
ment modifications may cause fire or injury.
If used, the key switch bypass is intended for use
only during set-up operations. Production should
never be done with safety interlocks disabled.
Never use equipment intended for use in waterborne
installations to spray solvent based materials.
The paint process and equipment should be set up
and operational in accordance with NFPA- 33, NEC,
and OSHA requirements.
H A Z A R D H A Z A R D H A Z A R D H A Z A R D H A Z A R D
Tells what the hazard is. S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S S A F E G U A R D S
Tells how to avoid the hazard. A R E A A R E A A R E A A R E A A R E A
Tells where hazards
may occur.
ARCHIVE