Ransburg Color Valve Stack CCV-5100 - Manual (Page 11)

The following is for “Pre-Engineered Color Valve
Stack Assemblies”. Please reference “Color Valve
Stack Selection Chart” for the stack assembly
number.
Part Number CCV-51XX-XXX identifies the con-
figuration of the stack assembly.
(CCV-51)XX-XXX - Color Stack As-
sembly
Includes the top block and solvent valve. The
solvent valve is always supplied with a check
valve and a 3/8-inch ODT stainless steel female
elbow for fluid inlet.
CCV-51(XX)-XXX - Number of Color
Valves
(Selection 00-30). These two numbers indicate
the number of valves required for paint inlet to the
stack assembly.
CCV-51XX-(X)XX - Air Push Valves
(Selection 0, 1, 2). This number indicates the
number of “air push” valves required. Each valve
is supplied with a check valve, gauge, regulator,
and 3/8-inch ODT brass push style fitting for air
inlet. The air push is used to push out residual
paint in the fluid supply line. This air is also pulsed
on and off with the solvent to create a scrubbing
action. In the event that two different pressures
are required, two air push valves can be supplied.
CCV-51XX-X(X)X - Check Valves
(Selection 0, 1). This number indicates whether
check valves are supplied on the paint inlet valves.
Check valves are used to prevent materials from
contaminating each other in the event that two
valves would be opened at the same time.
NOTE: Check valves will always be supplied on
solvent and air valves, regardless of selection
made here.
CCV-51XX-XX(X) - Fluid Inlet Fit-
tings
(Selection 0, 1, 2). This number indicates wheth-
er no fitting, elbows, or tees are supplied for the
fluid inlet to the color valves. Elbows are typically
utilized for fluid inlet. Tees are used for circulat-
ing the paint at the color valve. The elbows and
tees are stainless steel and accept a 1/4-inch OD
fluid line.
All valves are supplied with a brass push style,
swivel elbow for the air pilot. This fitting accepts
a 1/4-inch OD tube.
PRE-ENGINEERED COLOR VALVE STACK ASSEMBLIES
8
Color Valve Stack - Introductions
LN-9113-06.3
Ransburg