Ransburg MCV Series Module Color Changer 78011-XX - Manual (Page 9)

INTRODUCTION
DESCRIPTIONS
The MCV Color Changer is a material valve
stack used to control material flow to an applicator
or other material supply equipment. The stack
assembly is made up of several sub-assembled
stacks which are then connected together.
A description of stacks are as follows:
• Attached Bell Wash Module - These may
be attached to the main stack. Both avail-
able assemblies contain external check
valves on the inlet parts to prevent back
flow of material.
• Stand Alone Bell Wash Module - These
may be mounted seperatly away from the
stack assembly. An external outlet port is
included to provide a connection to an
applicator or other such device. Both
available assemblies contain external
check valves on the inlet ports to prevent
back-flow of material.
• 2 - Color Block Module
• 4 - Color Block Module
• 8 - Color Block Module
• Inline DR-2 Regulator with performance
matching the industry standard
Ransburg DR-1 regulator
• Flow Meter Module for use with bottom
ported fluid flow meters.
The 78949-00 Microvalve was designed to trigger
up to 2-million cycles. The fluid and air sections
are separated by a weep port to prevent contam-
ination between air and fluid.
NOTES
MCV Color Changer - Introduction
CS-01-01.8 6
Ransburg