beautypg.com

Installation, Ransburg, Mcv installation procedures – Ransburg MCV Series Module Color Changer 78011-XX User Manual

Page 13: Determine location for color changer, Mcv color changer - installation

background image

MCV INSTALLATION

PROCEDURES

Determine Location For Color

Changer

The color changer should be located as close as

possible to the spray device in order to save paint

and solvent with a color changer. If possible, use

an enclosure to protect the color changer from

airborne paints and solvents.

Calculate Footprint Of Color

Changer (See Figure 2)

To calculate the footprint of the color changer add:
• The dimension of the purge assembly
• The dimension(s) of the module(s) used to cre-

ate the desired number of color valves

• The dimensions of control devices (regulator

and flow meter)

• The dimension of the output assembly

Example: To calculate the footprint of an 8-color

MCV Assembly:

2” (purge assembly) + 4 7/8” (8-color valve as-

sembly) + 3/4” (output assembly) = 7 5/8”

INSTALLATION

Figure 2: Calculating Footprint of Color Changer Example

NOTE

> If using the optional flow meter block,

include dimension (3) in calculation.

2

114

2 7

16

478

3

2 7

16

3

4

PURGE ASS'Y.

78070-00

2 COLOR ASS'Y.

78071-00

4 COLOR ASS'Y.

78072-00

8 COLOR ASS'Y.

78073-00

2:1 REGULATOR ASS'Y.

79239-XX

ASS'Y.

FLOW METER BLOCK

78076-00

ASS'Y.

OUTLET BLOCK

78074-00

2

1

3

4

MCV Color Changer - Installation

CS-01-01.8

10

Ransburg