Ransburg MCV Series Module Color Changer 78011-XX - Manual (Page 15)

Solvent
Color 1 IN
Main Air
Flow Meter
Fluid
Regulator
MCV Color Selector
Spray
Device
Color 1 OUT Color 2 IN Color 2 OUT
Figure 5: Color Changer Schematics
OPERATING
The changer consists of modules stacked on
top of each other with each module allowing two
material selections. Modules may be added
or removed from the assembly as desired; the
user need only purchase the appropriately sized
changer. If, for instance, the number of required
materials increases, the changer can be expand-
ed by adding more modules. Also, each module
can be individually serviced. (Recommended
for use with waterborne or solventborne paints.)
Figure 5 shows typical color changer schematics
to prevent back flow of material.
OPERATION
MCV Color Changer - Operation
CS-01-01.8 12
Ransburg