beautypg.com

Chapter 60: ipv6 interface commands, Table 60-1, Ipv6 configuration commands – Accton Technology Direk Tronik ES4524D User Manual

Page 533: Ipv6 interface commands

background image

60-1

Chapter 60: IPv6 Interface Commands

An IPv6 address can either be manually configured or dynamically generated. You
may also need to a establish an IPv6 default gateway between this device and
management stations that exist on another network segment. Both IP Version 4 and
Version 6 addresses can be defined and used simultaneously to access the switch.

Table 60-1 IPv6 Configuration Commands

Command

Function

Mode

Page

Interface Address Configuration and Utilities
ipv6 enable

Enables IPv6 on an interface that has not been configured with an

explicit IPv6 address

IC

60-2

ipv6 general-prefix

Defines an IPv6 general prefix for the network address segment

GC

60-3

show ipv6

general-prefix

Displays all configured IPv6 general prefixes

NE, PE

60-4

ipv6 address

Configures an IPv6 global unicast address with an option to use an

IPv6 general prefix, and enables IPv6 on an interface

IC

60-4

ipv6 address

autoconfig

Enables automatic configuration of IPv6 global unicast addresses

on an interface and enables IPv6 on the interface

IC

60-6

ipv6 address eui-64 Configures an IPv6 global unicast address for an interface using an

EUI-64 interface ID in the low order 64 bits, and enables IPv6 on the

interface

IC

60-7

ipv6 address

link-local

Configures an IPv6 link-local address for an interface and enables

IPv6 on the interface

IC

60-9

show ipv6 interface

Displays the usability and configured settings for IPv6 interfaces

NE, PE 60-10

ipv6 default-gateway Sets an IPv6 default gateway for traffic

GC

60-12

show ipv6

default-gateway

Displays the current IPv6 default gateway

NE, PE 60-12

ipv6 mtu

Sets the size of the maximum transmission unit (MTU) for IPv6

packets sent on an interface

IC

60-13

show ipv6 mtu

Displays maximum transmission unit (MTU) information for IPv6

interfaces

NE, PE 60-14

show ipv6 traffic

Displays statistics about IPv6 traffic

NE, PE 60-14

clear ipv6 traffic

Resets IPv6 traffic counters

PE

60-20

ping ipv6

Sends ICMP echo request packets to an IPv6 node on the network NE, PE 60-21

Neighbor Discovery
ipv6 neighbor

Configures a static entry in the IPv6 neighbor discovery cache

GC

60-22

ipv6 nd dad attempts Configures the number of consecutive neighbor solicitation

messages sent on an interface during duplicate address detection

IC

60-23

ipv6 nd ns interval

Configures the interval between IPv6 neighbor solicitation

retransmissions on an interface

IC

60-25

show ipv6 neighbors Displays information in the IPv6 neighbor discovery cache

NE, PE 60-26

clear ipv6 neighbors Deletes all dynamic entries in the IPv6 neighbor discovery cache

PE

60-27

This manual is related to the following products: