Accton Technology Direk Tronik ES4524D - Manual (Page 306)

File Management Commands
35-6
35
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: Always 1)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Table 35-2 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir
File name File type Startup Size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
D1007 Boot-Rom Image Y 1531520
V10028 Operation Code Y 3862936
Factory_Default_Config.cfg Config File N 455
startup Config File Y 4555
startup1.cfg Config File N 3675
---------------------------------------------------------------------------
Total free space: 26345472
Console#
Console#whichboot
File name File type Startup Size (byte)
-------------------------------- -------------- ------- -----------
Unit1:
D1007 Boot-Rom Image Y 1531520
V10028 Operation Code Y 3862936
startup Config File Y 4555
Console#