General Tools and Instruments DPS16 - Manual (Page 20)

OPERATING & MAINTENANCE TIPS - P16PIP
The reel operates equally well in a horizontal or vertical position.
The bracket for the H16 (DCS1600) borescope console at the top of the P16PIP has a flexible-
obedient stem that allows the console’s screen to be angled to a comfortable viewing position.
DO NOT BEND this stem at an angle greater than 90° (see figures immediately below).
Before attempting to wind the probe back onto the reel, remember to “unlock” the reel by
undoing the Reel stopper (see Fig. 2). The most effective way to rewind the probe is to push it
onto the reel through the bars of the Probe guide
(see Fig. 2) horizontally from a distance of about
12 inches. Continue pushing until the Joint ball has
passed through the Probe guide. Stop when the
camera head meets the Camera head stopper
(see figure at right below).
20
12 in.
90°
✓