Finish Thompson S6 BATTERY REPLACEMENT - Manual (Page 4)

11. Swap out the 3 switch wires with insulated flag connectors one at a time. Using a Needle Nose Pliers remove the out-
side red switch wire first. Replace it with the new red switch wire from the outside of the new battery pack. See
Figures 12 & 13.
12. Remove the middle red switch wire & replace it with the new red switch wire from the middle of the battery pack.
See Figures 14 & 15.
13. Remove the last remaining black switch wire & replace it with the new black switch wire from the new battery pack.
See Figures 16 & 17.
Figure 12 Figure 13
Figure 17 Figure 16
Figure 15 Figure 14
14. Old battery pack should be completely disconnected from the Motor Cover & Fan Assembly. Cut all wires attached to
the battery pack one at a time. See figure 18. Old Battery Pack is now ready to be taken to a recycling center. New bat-
tery pack is ready to install in motor canister (item 4).
To learn more about RBRC, state regulations concerning recycling batteries and battery drop off loca-
tions visit their website at www.call2recycle.org or call 1-800-822-8837. (European countries please
follow EC Directive Batteries 2006/66/EU.)
Figure 18