Fairbanks 3300 Reliant Series Floor Scale - Manual (Page 7)

E. Installation Procedure
1. Select a location which is level and will fully support the weight of the platform plus
a full capacity load.
2. Remove the top of the crate and all packing/banding material.
3. Screw the two (2) eyebolts into the threaded adapters in the platform top. Use a
forklift or other lifting means along with chains, cables, or nylon straps to remove
the scale from the crate bottom.
4. Set the scale so the interface cable exits in a direction where it can be protected.
If possible, use a cable protector to reduce trip hazards and protect the interface
cable from being damaged.
5. Wire the scale interface cable to the proper type indicator using the following
platform wiring/ color code:
Cable Wire Color Function Analog Instrument
Black (-) Excitation (-) Excitation
Green (+) Excitation (+) Excitation
Yellow Shield Shield
White (+) Signal (+) Signal
Red (-) Signal (-) Signal
10/06 7 50783 Issue 2
~Caution~
Failure to use the proper lifting tools may result in personal injury.