Fairbanks 3300 Reliant Series Floor Scale - Manual (Page 5)

A. General Service Policy
Prior to installation, it must be verified that the equipment will satisfy the customer's
requirements as supplied, and as described in this manual. If the equipment cannot satisfy the
application and the application cannot be modified to meet the design parameters of the
equipment, the installation should not be attempted.
It is the customer/operator's responsibility to ensure the equipment provided by Fairbanks is
operated within the parameters of the equipment's specifications and protected from accidental
or malicious damage. Other than the procedures authorized in the Operating manual, no
service, repair, or adjustments may be performed by unauthorized / untrained service
personnel. Any unauthorized repairs will void any verbal, implied, or written warranties.
B. Overview
1. These instructions apply to the floor scale and its specific installation
procedures. The procedures for instruments, printers and other peripherals are
given in manuals specifically provided for those units.
2. All mechanical calibrations and or adjustments required to make this equipment
perform to accuracy and operational specifications are considered to be part of
the installation, and are included in the installation charge. Only those charges
which are incurred as a result of the equipment's inability to be adjusted or
calibrated to performance specifications may be charged to warranty.
3. Absolutely no physical or electrical modifications are to be made to this
equipment. Electrical connections other than those specified may not be
performed, and physical alterations (holes, etc.) are not allowed.
4. Before the installation is considered complete, the equipment is to be calibrated
to meet or exceed any applicable weights and measures requirements, if
applicable. The installing technician is responsible to make certain customer
personnel are fully trained and familiar with the capabilities and limitations of the
equipment. Be prepared to recommend the arrangement of components which
will provide the most efficient layout, utilizing the equipment to the best possible
advantage. The warranty policy must be explained and reviewed with the
customer.
10/06 5 50783 Issue 2
Section 2: Installation