FIREPOWER MXL-IQ - Manual (Page 6)

PS-5N7
MOM-2 Network Option Module Card Cage
The MOM-2 provides the MXL-IQ main unit with card slots
for optional modules. Each MOM-2 provides space for one
full-width (ALD-2I, NIM-1W or CZM-4) or two half-width
option modules (CSM-4, CRM-4, CMI-300, REP-1).
MOM-4 Network Option Module Card Cage
The MOM-4 Card Cage provides the MXL-IQ with card
slots for option modules. Each MOM-4 supplies connec-
tion space for either two full width option modules
(ALD-2I, CZM-4, NIM-1W) or four half width option
modules (CSM-4, CRM-4, CMI-300, REP-1) or a combina-
tion of one full and two half width modules.
NCC-G
PS-5N7 5 Volt Power Supply/Network Interface
The PS-5N7 is a 5V power supply and MXL-IQ local
network interface module. The PS-5N7 is an integral part
of the RCC-1.
NIM-1W
FireFinder — Network Color Graphics
FireFinder is a PC based color graphics display and
control package designed for use with the LifeLINK
network and provides full control and annunciation for a
LifeLINK network of up to 63 MXL-IQ or MXL systems.
The NCC-G is used to monitor and control alarms,
troubles, security, supervisory and all system events
from one of many MXL series systems. The NCC-G
maintains an extensive history log of all system events
and has extensive report generation capabilities. User
programmable function buttons are programmable to
allow site specific control function configuration. Mul-
tiple NCC-Gs may be connected to a LifeLINK network.
The NCC-GL serves as a graphical command center for a
single MXL-IQ system. All of the FireFinder controls
utilize a friendly design which intuitively guides the
operator through all system conditions.
NIM-1W Network Interface Module
The NIM-1W is a full sized slot MXL-IQ module that
allows the interconnection or networking of up to 63
MXL/MXL-IQ systems. The NIM-1W provides an RS-485
communication path in either Style 4 or Style 7 wiring
configurations. The NIM-1W allows MXL/MXL-IQs to
have interpanel logic and communicate in a peer to peer
fashion. The NIM-1W can be programmed via CSGM
logic as an FSI (Foreign System Interface) to communi-
cate with external building control and annunciation
systems. The NIM-1W is programmable to serve as an
intelligent link to the air sampling detection system.
ICP
LIM-1
LIM-1 Line Isolator Module
The LIM-1 is a short circuit isolator module for use on the
MXL-IQ’s analog loops. The LIM-1 is capable of providing
Style 4, Style 6 wiring of ALD loops. Multiple short circuit
isolators can be used on a single ALD loop to prevent loss
of protection in the event of a short circuit.
MOM-2
MOM-4