FIREPOWER MXL-IQ - Manual (Page 5)

PIM-2 Parallel Printer Interface
The PIM-2 is an MXL-IQ or CXL parallel printer interface
module. PIM-2 connects to PIM-1 to allow MXL-IQ connec-
tion and supervision of any EDP listed printer.
The MXL-VDT is a 14" amber monitor with detachable
keyboard. It provides an interactive terminal for secondary
display of MXL-IQ information, and operation of MXL-IQ
functions such as Acknowledge, Silence and Reset, as
well as arming and disarming devices. It also provides a
means for generating system reports such as listing
smoke detector sensitivity settings and voltages, battery
and power supply voltages and current and displaying the
history event log. An unsupervised printer may be
connected to the MXL-VDT.
MXL-VDT
PIM-2
PAL-1 UL Listed Parallel Printer
The PAL-1 is a UL listed supervised parallel system printer
for MXL-IQ or CXL. The PAL-1 connects to the PIM-2 and
PIM-1 to provide MXL-IQ with a UL listed parallel printer
that is supervised.
PAL-1
RCC-1
MXL-VDT Interactive Video Display Terminal
RCC-1 Remote Command Console
The RCC-1 is a remotely located MXL-IQ annunciator
display module. The RCC-1 contains an 80 character LCD
display and control keypad (MKB) and a PS-5N7 network
interface. RCC-1s can be located anywhere that control or
annunciation is required. RCC-1 can be programmed for
display only or can provide display and system control. If
a PIM-1 is added to the RCC-1, remote printers, VDT, or
graphics computers can be located throughout a facility.
ICP-B6 Intelligent Control Point
The ICP-B6 is a field mounted output module capable of
being programmed to be either a remote bell, horn, or
strobe circuit. The ICP-B6 communicates with the MXL-IQ
via the ALD loop.
RCC-2
RCC-2 Remote Command Console
The RCC-2 is a remotely located MXL-IQ annunciator display
module mounted in a small enclosure (8-1/2” W x 7” H x
2-7/8” D). The RCC-2 can be located anywhere that control
or annunciation are required. It contains an 80 character
LCD display, a control keypad for system controls, and a
PS-5N7 network interface. No function keys are included
with the RCC-2. It can be programmed for display and
control or display only. If a PIM-1 is added to the RCC-2,
remote printers, VDT, or graphics computers can be located
throughout a facility.
RSE-1 Remote Serial Enclosure
The RSE-1 is a remotely located MXL-IQ module that
allows a connection to a printer, video display terminal,
alphanumeric pager interface, or remote diagnostic
module. It contains an annunciator board and a PS-5N7
interface board, with space in the enclosure for a PIM-1
printer driver board.
RSE-1