FEC AFC1200 - Manual (Page 22)

)(& ,QF
6.5 Torque Recovery
The Torque Recovery function is used when the potential for joint relaxation and interaction
exists. Under this control method, the fastener(s) are secured to final torque and then held at
a programmed value for a programmed period of time. FEC INC. personnel have control of
the value and duration of the Torque Recovery function.
NOTE: Do not use this method of fastening without the assistance of FEC personnel.
Attempting to utilize this method without FEC assistance may result in degraded
System performance.
STD.
TORQUE
TIME
1
SEC.
FIG. 6-5 Torque Recovery
Chapter 6: Fastening Instructions
Page 6-22