FEC AFC1200 - Manual (Page 10)

)(& ,QF
Maximum allowable 2nd, 3rd and Final Step
cycle times FINAL STEP (TIME)
Maximum allowable fastening cycle time 1ST STEP (TIME)
Engineered fastening specification for rotation
angle FINAL ANGLE
30 ~ 50% of FINAL ANGLE for Hard joints
50 ~ 90% of FINAL ANGLE for Soft joints
Set above 2nd ANGLE 3RD ANGLE
30 ~ 50% of FINAL ANGLE for Hard joints
50 ~ 90% of FINAL ANGLE for Soft joints
Set above 1st TORQUE/ANGLE 2ND ANGLE
30 ~ 50% of resultant torque for Hard joints
50 ~ 90% of resultant torque for Soft joints SPEED CHANGE (TORQUE)
Engineered fastening specification at which
angle control begins THRESHOLD 2 (TORQUE)
30 ~ 50% of FINAL ANGLE or resultant torque
for Hard joints
50 ~ 90% of FINAL ANGLE or resultant torque
for Soft joints 1ST TORQUE/ANGLE
RECOMMENDATION FUNCTION
Chapter 6: Fastening Instructions
Page 6-10