E-Mon EIDR-16J*RJ - Manual (Page 14)

INTERVAL DATA RECORDER (IDR)
62-0394-03 14
6.0 SERIAL COMMUNICATIONS (EZ7)
a. Hardwired System using the USB Communication Key. (See the hardwired
system configuration diagrams in Appendix F.)
The USB communications key allows you to connect IDRs to a personal
computer that has E-Mon Energy software installed. The computer commu-
nicates with the IDRs through the USB key.
The USB key must be located within 15 feet of the host computer.
b. Connecting the USB key to the computer.
The USB key is supplied with:
a. (1) 3 FT USB A to USB B cable
b. (1) 7 FT 4 conductor modular cable with RJ11 4 pin plug
Connect the supplied USB A to USB B cable to the USB Key. Plug the oppo-
site end of the cable into any USB Port of a personal computer or laptop.
Using the CD included with the USB Key, Install (2) drivers to the PC or lap-
top.
c. Connecting IDRs to the USB Key using the 7 FT modular cable provided with
the USB Key.
As many as 52 IDRs can be connected to the USB Key over a total cable
length of 4000 feet.