Teledyne 2120 - Trace Nitrogen in Argon Analyzer - Manual (Page 16)

Introduction Model 2120
1.6 Internal Components
The internal components can be accessed by removing the top
cover of the analyzer. Figure 1-3 shows an inside view of the analyzer
and identifies specific components of the analyzer. See also Figure 1-4
for internal components inside the card cage.
Figure 1-3: Internal Component Identification
WARNING: HIGH VOLTAGE. ELECTROCUTION HAZARD.
UNPLUG THE ANALYZER BEFORE REMOVING THE
COVER. THE OUTPUT OF THE HIGH-VOLTAGE
TRANSFORMER AND THE ANALYTICAL CELL
ELECTRODES CAN APPROACH VOLTAGES OF
10,000 VAC. THE ANALYZER SHOULD BE SERVICED
ONLY BY A QUALIFIED SERVICE TECHNICIAN.
6
Teledyne Analytical Instruments