SPP Pumps Unistream - Manual (Page 16)

Manual No/Rev
W21-002E / 10
Operators Instructions for
Unistream Centrifugal Pumps
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 16 of 24
8. Pump Details
8.1 Pump Dimensions
For installation dimensions and pump weights, please refer to a Pump General Arrangement drawing
or to pump information from the SPP RAPID electronic catalogue.
8.2 Pump Cross Section Drawings
Pump section for shaft units 25 with clamped casing cover.
(i.e. pump sizes - 32/13, 32/16, 40/13, 40/16, 50/13, 50/16, 65/13, 65/16, 80/16, 80/20 & 100/20)
SOFT PACKED PUMP SECTION
90.3
41.1
50.2
56.0
23.0
94.01
93.0
92.2
41.14
90.34
41.15
90.35
10.2
18.3
90.11
93.01
32.1
42.1
94.0
21.1
36.0
90.1
40.02
41.17
91.3 92.0
90.2
16.1 45.2 50.7 91.4 33.0
45.8 40.0 40.01 52.4 46.1 90.21
92.01 90.31
41.11 64.2
43.3 40.01 52.3
73.1
41.17
71.0
73.2
73.3
71.1
41.23 16.5 41.22
41.16
73.11
WATER COOLED
STUFFING BOX MECHANICAL SEAL
STUFFING BOX
UNI25XSD.CDR