SPP Pumps Instream - Manual (Page 12)

Manual No/Rev
W23-001E / 8
Operators Instructions for
Instream Centrifugal Pumps
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 12 of 16
8. Pump Details:
8.1 Pump Dimensions
For installation dimensions and pump weights, please refer to a Pump General Arrangement drawing or to
pump information from the SPP RAPID electronic catalogue.
8.2 Pump Cross Section Drawings
Typical sections for pumps with clamped casing covers:
Pump sizes - 40/13, 40/16, 50/13, 50/16, 65/13, 65/16, 80/13, 80/16, & 100/16.
Typical sections for pumps with bolted casing covers:
Pump sizes - 50/20, 65/20, & 80/20.
90.31
41.11
90.35
41.15
50.2
56.0 23.0 94.01 93.0
92.2 10.2
92.0
90.2
16.1
40.0
40.01
52.3
34.4
100.001
90.12
80.1
43.3
109.01
21.11
101.001
INSTXSC2.WMF
90.31
41.11
90.35
41.15
50.2
56.0 23.0 94.01 93.0
92.2 10.2
92.0
90.2
92.0
90.22
16.1
40.0
40.01
52.3
34.4
100.001
90.12
80.1
43.3
109.01
21.11
101.001
INSTXSB2.WMF