SPP Pumps Auto Prime Medium Head Open Set - AC & AL Range - Manual (Page 6)

Manual No/Rev
W72-002 / 11 Operators Handbook for
Diesel Driven Pump Sets
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 6 of 16
2. SAFETY PRECAUTIONS
2.1 SAFETY SYMBOLS
Safety instructions within this manual are
marked with the following symbols:
This symbol refers to general mechanical
aspects of safety.
This symbol refers to electrical safety.
This symbol gives warning of a hazard
to the pump itself, which in turn could
cause a risk to personal safety.
2.2 PUMP SAFETY PRECAUTIONS
apply to all the following:-
2.2.1 Never insert anything into the pump
casing whilst the pump is running and
the suction or delivery hoses are
disconnected.
2.2.2 Moving parts are guarded to protect you.
Guards removed for maintenance must
be replaced before starting the pump.
2.2.3 If the supplied Bauer connections are
not utilised, then use all flange bolts
when fitting suction and delivery hoses.
2.2.4 Always lift pump sets vertically by the
lifting eye. Do not lift with the forks of a
fork truck under the fuel tanks. Never lift
with suction or delivery hoses attached.
The increased weight of these items
may cause lifting gear failure.
2.2.5 Check the condition and security of the
lifter frame or bracket at regular
intervals.
2.2.6 Check the type of liquid being pumped
before working on pump ends. Residues
could be hazardous to your health. If in
doubt flush out with clean water before
work commences.
2.2.7 Personnel working on the pump unit
must always wear clean, correctly fitting
clothing and safety footwear. Clothing
impregnated with oil or fuel can
constitute a health hazard through
prolonged contact with the skin and may
also constitute a fire hazard.
2.2.8 Always allow adequate ventilation for
diesel engines. Be aware of fire risks
from items such as exhaust pipes
and
silencers. Never place
flammable items around the unit.
2.2.9 Collapsible hoses must not be used
on the suction side of the pump.
3. TRANSPORT
3.1 ROAD TOWED
Lighting boards are provided for road
going trailers.
3.2 TRAILER OR WAGON CARRIAGE
Transportation on a trailer or wagon will
require the unit to be strapped or roped
down. Always strap/rope the unit around
the chassis - NEVER over the engine,
pump or canopy (if fitted).
Ensure that the straps/ropes do not
come into contact with any items
(switches, drain taps, etc..) which may
be vulnerable to damage during transit.
3.3 MOVEMENT BY LIFTING
If the unit is moved by lifting then the
condition and security of the lifter must
be checked before use.
The lift must always be vertical on the
eye provided.
Never allow the unit to be subject to a
‘snatch’ loading.
Do not allow the unit to swing whilst
being lifted.
Keep people away from the area
underneath the lifted unit and the
immediate surrounding area.
Failure to observe any of the above
could result in personnel injury or death
due to failure of the lifting gear.
ATTENTION
ATTENTION
ATTENTION