Bosch MUMXL10T Kitchen machine MaxxiMUM - Manual (Page 19)

Robert Bosch Hausgeräte GmbH 19
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.75 litres of hot or frothing liquid.
Important!
Use the appliance with original accessories only.
When using the accessories, follow the enclosed operating instruc-
tions. Attach and use only one tool or accessory.
, Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.
, Safety systems
Start lock-out
See “Overview of the operating positions”
table.
In pos. 1 the appliance cannot be switched on.
The appliance can be switched on
in pos. 2–4 only:
– when the bowl has been inserted and
rotated as far as possible or
– the tool drive cover (7) has been
attached.
In Pos. 5 the appliance can only be switched
on when the tool drive cover (7) has been
attached.
The blender must be screwed in all the way.
In pos. 6 the appliance cannot be switched
on unless the mincer and adapter have been
attached correctly (see mincer operating
instructions).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored.
To restart the appliance, turn the rotary
switch (3) to 0/off, then switch on the requi-
red setting.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
Possible causes:
– very large amounts of ingredients,
– appliance operated too long.
If a safety system is activated, see
“Troubleshooting”.
The operating instructions describe
several models, see also overview
of models (Fig. ).
en