Bosch TES50129RW VeroCafe Machine à café Expresso automatique Noir - Manual (Page 20)

Robert Bosch Hausgeräte GmbH
20 en
Problem Cause Remedy
Grinding unit does not grind
the beans.
Beans are not falling into
the grinding unit (beans too
oily).
Gently tap the bean con-
tainer (1). Change the type
of coffee if necessary.
When the bean container
(1) is empty, wipe it with a
dry cloth.
No hot water dispensed. The milk frother (6) is soiled. Clean the milk frother (6) ,
see “Maintenance and daily
cleaning”.
Too little or no milk froth. The milk frother (6) is soiled. Clean the milk frother (6),
see “Maintenance and daily
cleaning”.
Build-up of limescale in the
appliance.
Descale the appliance.
Milk unsuitable for frothing. Use milk with a fat content
of at least 1.5%.
The milk frother (6) is not
assembled correctly.
Wet the milk frother parts
and press together firmly.
Coffee dispensing slows to
a trickle or stops completely.
The grind setting is too fine
or the pre-ground coffee is
too fine.
Adjust the grinding unit to
a coarser setting or use
coarser pre-ground coffee.
Build-up of limescale in the
appliance.
Descale the appliance.
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a
higher proportion of robusta
beans.
The beans are no longer
fresh.
Use fresh beans.
The grind setting is not suit-
able for the beans.
Adjust the grind setting to
fine.
Coffee is too “acidic”. The grind setting is too
coarse or the pre-ground
coffee is too coarse.
Adjust the grinding unit to a
finer setting or use finer pre-
ground coffee.
Unsuitable type of coffee. Use a darker roast.
If you are unable to solve the problem, please call the hotline.
Simple troubleshooting
TES501_Heft1_RW.indb 20 14.09.2011 16:10:31