PowerMadd SOS Yamaha 14806 - Manual

P
OWER
M
ADD
®
Spare Oil & Storage
Mounting Instructions for: Yamaha S.O.S. Part No. 14806
HARDWARE INCLUDED:
Item Qty Description
1 1 Yamaha S.O.S.
2 4 #14 x ¾” Tek Hex Head Screw
Mounting Options: PowerMadd’s Yamaha S.O.S. is designed to mount to the footrest on the clutch side of all Yamaha
sleds built with the SX and Viper chassis.
Step 1: On the clutch side of the engine compartment, line up the four holes of the S.O.S. with the four holes of the
footrest.
Step 2: Install the S.O.S. using the four self tapping screws provided, making sure the screws draw tight to the
surface of the S.O.S.
Important Note: If your footrest does not have four holes, place the S.O.S on the footrest and slide it away from the
clutch and up against the bellypan. Mark and drill the four holes using a 7/32” drill bit.
LIMITED WARRANTY
POWERMADD ® warrants this product to be free from defects in material and workmanship, and may elect to repair or
replace this product. This warranty does not cover any labor costs to remove or reinstall this product.
To inquire on the warranty of this product, please contact POWERMADD ® .
POWERMADD
1-800-435-6881
www.powermadd.com PP5029 REV A