Poweramp POWERSTOP SERIES - Manual (Page 7)

5
4111-0014 — July 2013
SAFETY
Safety Decals
Every 90 days (quarterly) inspect all safety labels and tags to
ensure they are on the dock leveler and are easily legible. If any
are missing or require replacement, please call 1-800-643-5424
for replacements.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/32"
DECIMAL:
.00 = .01"
.000 = .005"
ANGULAR: 1
MATERIAL
DRAWN BY CHECKED BY
DRAWING NO.
DATE BKM 10/17/2008
DL SAFETY
LABELS
DOCK LEVELER
P O W E R A M P
M C G U I R E
D L M
                           
L o a d i n g D o c k E q u i p m e n t
This print is the property of Systems, Inc. and represents a proprietary article in which Systems, Inc. retains any and all
patent and other rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this print does
not convey any permission to reproduce, print or manufacture the article or articles shown therein, such permission to be
granted only by written authorization signed by an officer or other authorized agent of Systems, Inc. thereof.
SAFETY LABEL LOCATIONS
1751-0727
1751-0138
2.
40
"
5.06"
Control Box Size:
Decal Size: 5.06 x 2.40
File Name: 1751-0727 Rev A
DANGER
1751-0727 Rev A
CRUSH HAZARD
M a i n t e n a n c e p r o p m u s t
support leveler behind bar.
Do not force maintenance
prop forward of bar to
s u p p o r t l i p . F a i l u r e t o
comply will result in death or
serious injury. Refer to
owner ’s/user ’s manual for
proper use.
Control Box Size:
Decal Size: 4 x 2
File Name: 1751-0138 Rev A
DANGER !
CRUSH HAZARD
DO NOT REMOVE hydraulic cylinder until leveler is
safely supported by maintenance prop. Refer to
owner’s/user’s manual for proper maintenance
procedure. Failure to comply will result in death or
serious injury.
1.
02
"
8.72"
Control Box Size:
Decal Size: 8.72 x 1.02
File Name: 1751-0729 Rev A
DANGER
1751-0729 Rev A
CRUSH HAZARD
Do not work under dock leveler unless this maintenance prop has been secured in the upright
position. Failure to comply will result in death or serious injury. See owner ’s/user ’s manual for proper
procedures.
2.
40
"
5.05"
Control Box Size:
Decal Size: 5.05 x 2.40
File Name: 1751-0731Rev A
CRUSH HAZARD
Rotate prop to maintenance
position. Open the pin latch
and insert through the
maintenance prop housing.
Close the pin latch to secure
prop. Use every time dock
leveler is serviced. Failure to
comply will result in death
or serious injury.
DANGER
1751-0731
DANGER
1751-0726 Rev A
2.
36
"
5.92"
Control Box Size:
Decal Size: 5.92 x 2.36
File Name: 1751-0726 Rev A
CRUSH HAZARD
DO NOT ENTER PIT unless dock leveler is
safely supported by maintenance prop. Place
barriers on driveway and dock floor to indicate
service work being performed. Failure to comply
will result in death or serious injury. Refer to
owner ’s/user ’s manual for proper maintenance
procedures.
1751-0729
1751-0731
1751-0726
3. 25
"
9.12"
Unsupported dock leveler
ramps can lower unexpectedly.
Before allowing vehicle to leave
the dock always:
! Ensure no equipment,
material or people are on
dock leveler.
! Return dock leveler to its
stored position at dock level.
Failure to follow posted instructions will result in death or serious injur y.
SAFETY INFORMATION
Call 262.255.1510 for replacement placards, warning labels, or owner’s/user’s manuals.
Control Box Size:
Decal Size: 9.12 x 3.25
File Name: 1751-0730 Rev A
DANGER OPERATION 7. Stay clear of hinges and front and 1. Read and follow all instructions and sides of moving dock leveler. warnings in owner ’s/user ’s manual. 8. N e v e r u s e d a m a g e d o r 2. Use of dock leveler restricted to malfunctioning dock leveler. Report trained operators problems immediately to supervisor. 3. Always chock trailer wheels or e n g a g e t r u c k r e s t r a i n t b e f o r e MAINTENANCE/SERVICE operating dock leveler or beginning to 1. Read and follow all instructions, load or unload. w a r n i n g s a n d m a i n t e n a n c e 4. Never use hands or equipment to schedules in the owner ’s/user ’s move ramp or lip manual. 5. Before activating dock leveler: 2. Maintenance/Service of dock leveler ¥ Ensure trailer is backed in against restricted to trained personnel. 3. Place barriers on the driveway and bumpers. dock floor to indicate service work is ¥ Remove any end loads if required. being performed. ¥ Check trailer alignment to avoid lip 4. DO NOT ENTER PIT unless dock interference. If lip does not lower to leveler is securely supported by trailer bed, reposition vehicle. maintenance prop. 6. Ensure truck bed supports extended 5. If electrically powered turn off and use lip or leveler frame supports the ramp OSHA lockout/tagout procedures. before driving on ramp.
Control Box Size: Decal Size: 13 x 2 File Name: 1751-0329
DO NOT
FORK THIS SIDE
Control Box Size: Decal Size: 6 x 2 File Name: 1751-0330 REV A
FORK
HERE
1751-0730
(x2)
(decal placed in same position on both sides)
(decal placed in same position on both sides)
(decal placed in same position on both sides)
1751-0329
(x2)
1751-0330
(x2)
Note
This is a example of dock leveler safety decals. See manual for your specific model for correct
safety decal sheet or consulate Tech Serves