Bosch PRS926F70E Gas-Kochstelle Glaskeramik 90 cm - Manual (Page 14)

15
Faults
Sometimes certain faults detected can be easily resolved.
Before calling the Technical Assistance Service, bear in
mind the following advice:
Fault Possible cause Solution
The general electrical
system is
malfunctioning.
Defective fuse.
The automatic safety switch
has tripped or a fuse has
blown.
Check the fuse in the main fuse
box and change it if it is
damaged.
Check the main control panel to
see if the automatic safety switch
has tripped or a fuse has blown..
The automatic ON
function does not work.
There may be food or
cleaning products stuck
between the ignition sparkers
and the burners.
The burners are wet.
The burner covers are not
correctly positioned.
The appliance is either not
earthed, not connected
properly or the earth
connection is faulty.
The space between the ignition
sparker and the burner must be
clean.
Dry the burner covers carefully.
Check that the covers are
correctly positioned.
Contact the electrical installer.
The burner flame is not
uniform.
The burner components are
not correctly positioned.
The grooves on the diffuser
are dirty.
Ensure the components are
correctly positioned.
Clean the grooves on the
diffuser.
The flow of gas does
not appear normal or
no gas comes out.
The gas mains are turned off.
If the gas is supplied from a
gas bottle, check that this is
not empty.
Turn on all stop cocks.
Change the gas bottle.
The kitchen smells of
gas.
A gas tap has been left on.
There may be a leak from the
coupling to the gas bottle..
Turn off the gas taps.
Check that the coupling is
sound.
The safety valve on one
of the burners is not
working.
The grooves on the diffuser
are dirty.
Clean the grooves on the
diffuser.
The childproof lock
indicator light comes
on.
The electricity has come
back on after a power failure
or voltage drop.
Deactivate the childproof lock
(see page 10).
If the problem continues
contact the Technical
Assistance Service.