Advantech EKI-7657C User Manual
Page 61

51 Chapter3
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings which allow you to synchronize
switch clocks on the Internet.
• SNTP Client: Enable/disable SNTP function to get the time from the SNTP server.
• Daylight Saving Time: Enable/disable daylight saving time function. When daylight saving time is
enabled, you need to configure the daylight saving time period.
• UTC Timezone: Set the switch location time zone. The following table lists the different location time
zone for your reference.
Table 3.18: UTC Timezone
Local Time Zone
Conversion from UTC
Time at 12:00 UTC
November Time Zone
- 1 hour
11am
Oscar Time Zone
-2 hours
10 am
ADT - Atlantic Daylight
-3 hours
9 am
AST - Atlantic Standard
EDT - Eastern Daylight
-4 hours
8 am
EST - Eastern Standard
CDT - Central Daylight
-5 hours
7 am
CST - Central Standard
MDT - Mountain Daylight
-6 hours
6 am
MST - Mountain Standard
PDT - Pacific Daylight
-7 hours
5 am
PST - Pacific Standard
ADT - Alaskan Daylight
-8 hours
4 am
ALA - Alaskan Standard
-9 hours
3 am
HAW - Hawaiian Standard
-10 hours
2 am
Nome, Alaska
-11 hours
1 am
CET - Central European
FWT - French Winter
MET - Middle European
MEWT - Middle European Winter
SWT - Swedish Winter
+1 hour
1 pm
EET - Eastern European, USSR Zone 1
+2 hours
2 pm
BT - Baghdad, USSR Zone 2
+3 hours
3 pm
ZP4 - USSR Zone 3
+4 hours
4 pm