PASCO OS-8532 CONCAVE MIRROR ACCESSORY - Manual

Instruction Sheet
for the PASCO
Model OS-8532
CONCAVE MIRROR ACCESSORY
012-06528A
2/98
$1.00
Introduction
The PASCO OS-8532 Concave Mirror Accessory is de-
signed to be used with the PASCO Model OS-8515 Basic
Optics System. The Concave Mirror Accessory consists
of a +50 mm focal length concave mirror and a half-
screen. Both are mounted in accessory holders which fit
onto the Optics Bench that is part of the OS-8515 Basic
Optics System.
Using the Equipment
The white screen in the half-screen accessory can be ro-
tated to any angle. The reverse side of the concave mirror
is also silvered (but not front surfaced) and can be used as
a convex mirror.
The concave mirror accessory and the half-screen acces-
sory snap into place on the Optics Bench. To move an
accessory along the bench, grasp the base of the acces-
sory holder and squeeze the locking clip inward. Continue
to squeeze inward on the locking clip as you move the
accessory to the new position. When you release the lock-
ing clip, the accessory holder is held firmly in place.
© 1998 PASCO scientific
This instruction sheet written/edited by: Dave Griffith
from the date of shipment to the customer. PASCO will
repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return of
equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage and
shipped postage or freight prepaid. (Damage caused by im-
proper packing of the equipment for return shipment will not
be covered by the warranty.) Shipping costs for returning
the equipment, after repair, will be paid by PASCO scien-
tific.
accessory holder
locking clip
position indicator
Optics Bench
Figure 2: Holder on Optics Bench
Concave Mirror
Half-screen
Figure 1: Components
Limited Warranty
PASCO scientific warrants this product to be free from de-
fects in materials and workmanship for a period of one year