PASCO ME-9487 DROP ROD ACCESSORY User Manual

Page 2

Drop Rod Accessory

012-05459A

Limited Warranty

PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made

solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return ship-
ment will not be covered by the warranty.) Shipping
costs for returning the equipment, after repair, will be
paid by PASCO scientific.

➁

Thread the cord from the drop rod through the drop
rod clamp and clamp the end of the drop rod by tight-
ening the thumb screw.

➤

CAUTION: Do not overtighten the screw be-

cause the tube may be crushed.

➂

Plug the drop rod cord into the drop rod jack on the
side of the Ballistic Cart Accessory.

➤

NOTE: Plugging this cord in disables the

launching mechanism of the Ballistic Cart Acces-
sory so when you want to use the launcher you
must unplug the drop rod accessory.

➃

Note that the Drop Rod Accessory requires a special
ball that has an iron insert. The balls for the Drop Rod
Accessory and the Ballistic Cart Accessory are differ-
ent colors so they can be easily distinguished. To hang
the ball from the drop rod, the pin on the drop rod
must be inserted into the small hole in the ball. See
Figure 2.

Figure 2: Ball and Drop Rod

modified

pink ball

drop rod