PASCO PS-2546 Motion Sensor Bracket - Manual (Page 4)

Motion Sensor Bracket Model No. PS-2546
4 ®
Mounting Horizontally
1. Screw the Motion Sensor Bracket into the Motion Sensor.
2. Attach the magnet of the Bracket to a flat metal area, such as the side of a filing cabinet.
See photo below.
3. Turn the Motion Sensor and rotate the sensor head until it points in the appropriate
direction. Note: To help stabilize the Motion Sensor, it may be necessary to wrap the cord
over the Motion Sensor so that it hangs from the opposite side.
4. Tighten the thumb screw against the Motion Sensor to prevent it from rotating.
Note: The Motion Sensor Bracket is designed to support only a Motion Sensor and
its cord. It is NOT recommended to support heavier objects to the Motion Sensor
Bracket. In addition, when the Motion Sensor Bracket is attached to the Motion
Sensor and is mounted from the ceiling, do not pull on the Motion Sensor or its
cord.