PASCO ME-9847 Rotational Inertia Wands - Manual (Page 2)

®
PASCO Rotational Inertia Wands Operation
2
Operation
1. Grasp the grip area of one of the rotational inertia wands. Hold the wand so that it
is vertical or horizontal.
2. Twist your wrist to rotate the wand back and forth. Make a note of how hard or
how easy it is to rotate the wand.
3. Repeat with the other wand. Again make a note of how hard or how easy it is to
rotate the wand.
How does the blue wand (with the masses farther from the grip area) compare to the
red wand (with the masses nearer the grip area of the wand)?
Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Copyright
The PASCO scientific 012-12002A PASCO Rotational Inertia Wands Instruction Sheet is copyrighted with all rights reserved. Permis-
sion is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used
only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written
consent of PASCO scientific, is prohibited.
Trademarks
PASCO, PASCO scientific, DataStudio, PASPORT, Xplorer, and Xplorer GLX are trademarks or registered trademarks of PASCO sci-
entific, in the United States and/or in other countries. For more information visit www.pasco.com/legal. Windows is a registered trade-
mark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Computer, Inc., registered in
the U.S. and other countries.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: 916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax: (916) 786-3292
Web: www.pasco.com
Email: [email protected]