PASCO ME-9495 ANGLE INDICATOR - Manual

Instruction Sheet
for the PASCO
Model ME-9495
ANGLE INDICATOR
012-06262A
11/96
$1.00
better
teach science
ways to
Phone (916) 786-3800 • FAX (916) 786-8905 • email: [email protected]
10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA
®
© 1996 PASCO scientific
This instruction sheet written/edited by:
Introduction
The PASCO ME-9495 Angle Indicator is an accessory
used for measuring angles from 0° to 90° in two direc-
tions. There are four different methods of using the Angle
Indicator:
• hand-held, by tying a string to each side of the device.
ANGLE INDICATOR
90
80
70
60
50
40
30
20
10 0 10
20
30
40
50
60
70
80
90
ME-9495 ®
0
90
90
ANGLE INDICA
TO
R
• attached to a PASCO Dynamics Cart, by sliding the
device into the slots on the top of the cart. It is neces-
sary to adjust the thumbscrew and square nut as far
up as possible on the Angle Indicator.
ANGLE INDICATOR
90
80
70
60
50
40
30
20 10 0 10 20 30
40
50
60
70
80
90
ME-9495 ®
• attached to the side of a PASCO Dynamics Track.
➤NOTE: To store the Angle
Indicator, slide it in the slots under-
neath the Dynamics Track.
0
90
90
ANGLE INDICA
TO
R