Attaching the bracket to a rotary motion sensor, Removing the screen, Using the bracket with a cuvette – PASCO OS-8534A Aperture Bracket User Manual
Page 2: Screw storage, Technical support
®
A p e r t u r e Br a c k e t
O S - 85 3 4 A
2
2.
Turn the disk to select the desired aperture. The aperture in
use is in the lowest position.
3.
(Optional) Attach the bracket to the included component
holder as illustrated.
Attaching the Bracket to a
Rotary Motion Sensor
1.
Screw the included post into the bracket as illustrated.
2.
Secure the post in the clamp of a Rotary Motion Sensor.
Removing the Screen
Loosen the two thumbscrews on the screen to remove it. The cap-
tured thumbscrews remain loosely connected to the detached
screen.
Using the Bracket with a
Cuvette
To hold a cuvette (such as PASCO part SE-8739) in front of the
sensor, fasten the sensor to the Aperture Bracket as illustrated,
and place the cuvette between the sensor and the disk.
Screw Storage
When the thumbscrew is not in use, screw it into the storage loca-
tion as illustrated.
Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty
For a description of the product warranty, see the
PASCO catalog.
Copyright
The PASCO scientific 012-10299A
Aperture Bracket Instruc-
tion Sheet is copyrighted with all rights reserved. Permission is granted to
non-profit educational institutions for reproduction of any part of this man-
ual, providing the reproductions are used only in their laboratories and
classrooms, and are not sold for profit. Reproduction under any other cir-
cumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO, PASCO scientific, ScienceWorkshop, and
PASPORT are trademarks or registered trademarks of PASCO scientific,
in the United States and/or in other countries. All other brands, products,
or service names are or may be trademarks or service marks of, and are
used to identify, products or services of, their respective owners. For more
information visit www.pasco.com/legal.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax:
(916) 786-7565
Web:
www.pasco.com
Email: