Recommended experimental setup, Figure 1: attaching the fixed-position coil, Figure 2: attaching the adjustable coil – PASCO EM-6715 Helmholtz Coil Base User Manual
Page 2: Figure 3: coils positioned in the base, Figure 4: recommended experiment setup
Helmholtz Coil Base
012-07512A
2
200 T
URN F
IELD C
OIL
e
ed
Figure 1: Attaching the fixed-position coil
200
TURN
FIELD
COIL
e
ed
200
TURN
FIELD
COIL
e
ed
Figure 2: Attaching the adjustable coil
slide
direction
200 T
URN
FIE
LD C
OIL
o
o
o
200 TURN FIELD COIL
o
o
o
Figure 3: Coils Positioned in the Base
Magnetic Field
Sensor
Linear Motion
Accessory
Rotary Motion
Sensor
to
ScienceWorkhop
Interface
NOTE: The separation distance between the two
rectangular boxes on the base is 10 cm and is equal to
the radius of the PASCO Field Coils (See Figure 3).
A uniform magnetic field can be generated between
the coils when the two coils are placed 10 cm (1
radius) apart.
Figure 4: Recommended experiment setup
Recommended Experimental Setup
Use the Helmholtz Coils with the Rotary Motion
Sensor and the Magnetic Field Sensor to determine the
magnetic field strength for various positions both
outside and inside the Field Coils. Set up the
equipment as shown in Figure 4.
to power supply
stand and
support rod