PASCO PS-2146 Absolute Pressure_Temperature Sensor - Manual (Page 3)

®
A b s o l u t e P r e s s u r e / T e m p e r a t u r e S e n s o r P S - 2 1 4 6
012-08708B 3
Calibration
The absolute pressure for this sensor is factory calibrated and for temperature, calibration is usually not nec-
essary. However, a one-point or two-point calibration for temperature can be performed. To do so, you must
have an accurate, independent means of measuring temperature, such as a thermometer. For instructions,
refer to the documentation for your data acquisition software or data logger.
Suggested Uses
• Study gas laws, such as Charles’ Law, Boyle’s Law, and the Ideal Gas Law.
• Extrapolate pressure and temperature to determine absolute zero.
• Explore pressure and temperature relationships.
Other PASCO Equipment for use with the Absolute Pressure/Temperature Sensor
• *NOTE: The Absolute Pressure/Temperature Sensor was designed for use with any thermistor-based
PASCO Temperature probe that has a 3.5 mm (0.125 inch) mini stereo plug.
Specifications
*The temperature range depends on the temperature probe used. These specifications are for the Fast Response Temperature Probe.
Item Part Number
Skin/Surface Temperature Probe* PS-2131
Stainless Steel Temperature Probe* PS-2153
Heat Engine/Gas Law Apparatus TD-8572
Small Piston Heat Engine TD-8592
Item Temperature*
Range 0 to 700 kPa -10 °C to 70 °C
Accuracy ±2 kPa ±0.5 °C
Resolution 0.1 kPa 0.0025 °C
Repeatability 1 kPa 0.01 °C
Units kPa, N/m 2 , psi, atm, torr °C, °K, °F