PASCO PS-2343 USB Camera - Manual (Page 2)

®
M o d e l N o . P S - 2 3 4 3
2
display. Adjust the focus ring on the USB Cam-
era as needed.
2. If a SPARKlab is open, add a new page:
• Touch or click the New Page button.
The new page opens and the Measure-
ment List screen shows a name for the
USB Camera (such as “USB Video Device”).
• Touch or click the Image measurement to
select it.
When selected, Image is highlighted in orange
and the Video Image buttons in the Tools pal-
ette become active.
• Touch or click the large or small
Video Image button in the Tools
palette.
A Video Image display is added to the
Preview on the side of the page.
• Touch or click OK.
A new page containing a Live Image button in
the center of the display and the Video Image
button in the lower left of the display is added
to the SPARKlab.
• Touch or click the Live Image button.
In a moment, live video appears in the
display. Adjust the focus ring on the USB
Camera as needed.
Capture
To capture an image of the video display, do the follow-
ing:
• Touch or click the Video Image but-
ton to open the Video Image Tools
palette.
• Touch or click the Check button in
the Tools palette.
The Legend changes to show
“1. Image”. Successive images add
numbers to the Legend list.
• To return to the live video display,
touch or click the Video Image but-
ton to close the Video Image Tools palette, or
touch or click the Live Image button in the
Tools palette.
More Information
For more information about using a digital video device
with SPARK SLS or SPARKvue, refer to the SPARK
SLS or SPARKvue documentation.
Technical Support
For assistance with any PASCO product, contact
PASCO at:
For information about the USB Camera, enter PS-2343
in the Search window at the PASCO web site.
Limited Warranty For a description of the product warranty,
see the PASCO catalog. Copyright The PASCO scientific
Instruction Sheet is copyrighted with all rights reserved. Permis-
sion is granted to non-profit educational institutions for repro-
duction of any part of this manual, providing the reproductions
are used only in their laboratories and classrooms, and are not
sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Trademarks For trademark information visit
www.pasco.com/legal.
Product End of Life Disposal Instructions:
This electronic product is subject to disposal and recycling regu-
lations that vary by country and region. It is your responsibility to
recycle your electronic equipment per your local environmental
laws and regulations to ensure that it will be recycled in a man-
ner that protects human health and the environment. To find out
where you can drop off your waste equipment for recycling,
please contact your local waste recycle/disposal service, or the
place where you purchased the product.
The European Union WEEE (Waste Electronic and
Electrical Equipment) symbol (to the right) and on
the product or its packaging indicates that this
product must not be disposed of in a standard
waste container.
USB Camera
Measurement List in the New Page Screen
Video Image
buttons
Video
Image
display
E-mail: [email protected]
Web: www.pasco.com
Phone: +1 916 786 3800 (worldwide)
800-772-8700 (U.S.)
Check
button