PASCO ME-8973 Discover Collision Bracket - Manual (Page 2)

®
D i s c o v e r C o l l i s i o n B r a c k e t M E - 8 9 7 3
2
For Use with Older Tracks
If you have an older PASCO track (see illustration), install the
included washer to prevent the thumbscrew from “bottoming
out.”
Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Copyright
The PASCO scientific 012-10121A
Discover Collision Bracket Instruction
Sheet is copyrighted with all rights reserved. Permission is granted to
non-profit educational institutions for reproduction of any part of this man-
ual, providing the reproductions are used only in their laboratories and
classrooms, and are not sold for profit. Reproduction under any other cir-
cumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of
PASCO scientific, in the United States and/or in other countries. All other
brands, products, or service names are or may be trademarks or service
marks of, and are used to identify, products or services of, their respective
owners. For more information visit www.pasco.com/legal.
Newer track
(No washer needed)
Older track
Lacks extra T-slot clearance.
Install washer on thumbscrew.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: 916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax: (916) 786-7565
Web: www.pasco.com
Email: [email protected]