Chapter 4, System’s operation – Pach and Company AeGIS 8000P Series Manual User Manual
Page 24

AeGIS8000P
Page 24
Chapter 4
SYSTEM’S OPERATION
A. How to view tenant’s directory
1. Press
(scroll A-Z) or
2. Press
(scroll Z-A)
B. How to initiate a call from the system
Two ways to initiate a call
1. By scrolling (see A, press 3 or 6 to scroll) then
press # to call
2. By directory, press # (wait for dial tone) then
press the tenant’s directory number.
C. How to release the door remotely
1. Establish
a
communication
2. Tenant must press 9 to release the door.
D. How to make a call to an extension or voice
1. Established
a
communication
2. Press the voice mail or extension number
using the system’s keypad.
E. How to extend talk time
Talk time is set using function code 79 (10-180
seconds), see p22.
1. Establish
a
communication
2. Warning beep will be heard 10 minutes before
the talk time expired.
3. Press # to extend the talk time
F. How to call into the system
You must know the system’s phone number
1. Call the system’s phone number
2. The system will answer between 2
nd
- 4
th
rings,
then
BEEP BEEP!
will be heard
NOTE: VISITOR MUST KNOW THE TENANT’S
DIRECTORY NUMBER
ALTHOUGH, THE SYSTEM IS TESTED
WITH MOST PHONES, COMPATIBILITY ISSUE
MAY STILL BE OCCURRED, ESPECIALLY WITH
VOICE OVER IP (VOIP) PHONE.
PULSE PHONE WILL NOT WORK